Select Page

Slicker Iron On Clear Glossy Vinyl

$24.00

Slicker Iron On Glossy Vinyl

Slicker enables to you make your own laminated fabric!

Fuse Slicker to any smooth fabric to make it water-resistant. Fuse to paper to laminate signs, artwork and more.  It’s durable, flexible and can be stitched without leaving adhesive residue on the sewing machine needle.

This handy iron-on vinyl interfacing is perfect for projects like makeup wraps, cosmetic pouches and bags, lunch bags, and placemats that clean up with a wipe.  Fabric stays soft and is easy to sew and work with.

Packaged size is 17″ wide x 36″ long

Out of stock

Description

Slicker Iron On Glossy Vinyl

Tips for Using Slicer to laminate fabric

  • For best adhesion and wear, pre-wash fabrics without any fabric softeners to remove any sizing in the fabric before applying the Slicker.
  • Use Wonder Clips rather than pins to avoid leaving holes in the vinyl.
  • Always press using the release paper over the vinyl surface.
  • Not recommended for use in the microwave.
  • Clean the vinyl-coated fabric by wiping with a wet cloth/sponge. The manufacturer recommends cleaning by methods that do not involve submerging in water. Do not launder in washing machine.

How to apply Slicer to fabric

  • Peel paper backing/release paper from vinyl interfacing and set aside.
  • Place sticky side of vinyl interfacing against right side of fabric and smooth into place.
  • Top with the release paper.  Press with iron set to medium, no steam, for 8 seconds.  Repeat to bond entire surface. Do not touch iron directly to vinyl!
  • Flip project over, press and hold iron on back of project for an additional 4 seconds. Repeat to heat entire surface.
  • Allow to cool before using.

NOTE: Do not microwave or use in oven.

Care Instructions:

Wipe clean with damp cloth. Do not soak/submerge in water.

Additional information

Weight .200 kg
Dimensions 45 × 3 × 3 cm

You may also like…