Description
Thread Locker 242 For Securing Screws 10ml
Thread Locker 242 helps keep small screws secure in Chicago Screws, zipper ends, strap ends and other screw-fastened bag hardware.
Everyday movement and vibration can gradually loosen small hardware screws. Applying a small amount of thread locker to the screw thread before assembly creates a more secure bond while still allowing the screw to be removed with a flat-head screwdriver when required.
Why Use Thread Locker for Bag Hardware?
Looking for an alternative to Loctite threadlocker? This Thread Locker 242 performs the same type of practical job in bag-making projects—helping keep threaded hardware screws secure while still allowing removal with a flat-head screwdriver when required. Chris has used it in her own projects for years and recommends it as a budget-friendly option for Chicago Screws and other screw-fastened bag hardware.
- Helps reduce screws loosening through everyday movement and vibration
- Useful for bag hardware that is handled regularly
- Precision tip nozzle supports controlled application
- A small amount is all that is needed
- The screw can still be removed with a flat-head screwdriver when required
Suitable Bag Hardware
Thread Locker 242 is a useful companion for screw-fastened hardware including:
- Chicago Screws
- Metal Zipper Ends
- Metal Strap Ends with Screws
- Locks and Closures with Screws
- Screw In Purse Feet
- Wallet and Purse Frames
How to Apply Thread Locker 242
- Check that the screw and hardware fit together correctly before applying the thread locker.
- Make sure the screw thread is clean and dry.
- Use a pin to make a small opening in the precision nozzle. Do not cut the top off the nozzle.
- Apply a small drop to the screw thread.
- Assemble the hardware and tighten the screw securely.
- Follow the directions on the bottle before putting the finished project into use.
A little Thread Locker 242 goes a long way. Start with a small drop so you can keep the application controlled and avoid unnecessary excess.
Removing a Secured Screw
If the hardware needs to be removed or adjusted later, use the correct flat-head screwdriver to turn the screw and release the thread locker bond.
Use controlled pressure and choose a screwdriver that fits the screw slot properly to help avoid marking the hardware.
Helpful Tip from Chris
Test the fit and alignment of your hardware before adding the thread locker. Once you are happy with the placement, apply only a small drop to the screw thread and complete the final assembly.
Keep a pin with the bottle so the precision nozzle can be opened without cutting it. The smaller opening makes it much easier to dispense one controlled drop at a time.
Product Details
- Product: Thread Locker 242
- Size: 10ml bottle
- Application: Precision tip nozzle
- Use: Securing small screws in bag hardware
- Removal: Bond can be released using a flat-head screwdriver
Read and follow the directions on the bottle before use.
Have yet to use.. but a few projects in the Works..